The boiler used to heat water and generates steam from water. Steam is used from the food processing plant to power plants. In power, plant steam uses to run a steam turbine to generate electricity. Steam has an effective roll in our modern life. Generally, there are two types of boiler are available. First one is the water tube boiler and the second one is a fire tube boiler. Between these two types, you will find more categories. In this post, we will learn “Industrial Boiler – How It’s Made?”
Industrial Boiler, How it’s Made:
The water inside the boiler is heated by Oil, Natural Gas or Electricity. That’s means inside the boiler, there is lots of pressure. Making of industrial boiler starts with the plasma torch. This torch cut the holes in the solid sheet of special steels. But the thickness of the steel sheet depends on the pressure inside the boiler that needs to be handled. If it needs the high-pressure large amount of steam then the thickness of the steel sheet will increases.
Then a worker bends this steel sheet by a hydraulic press. The steel sheet will become the inner shell of the boiler. This inner shell will be used to heat the water and generate steam. But remember worker was pressing a flat steel sheet to make it round inner shell. That’s means this steel sheet needs to joint two sides together to make a complete round boiler inner shell. For this reason, a worker makes an edge at both sides of the steel sheet by a grinding machine for welding.
When the boiler inner shell comes to its final shape than its time for welding. Worker using a submerged arc welding machine and deposited a special material during the welding operation. This special material granular protects the welding from any air contamination. When welding is finished then worker removes the special material granular. In this way, we can get perfect welding.
In the next step worker welds, boilers head or tube head inside the boiler shell by manual hand welding. Then they fit the steel pipe inside the boiler head from one end to another end. After inserting all steel pipe workers secure all pipe by welding. Next, a combustion chamber inserts into the remaining space of the inner shell. Then they test this fully assembled pressure vassal by water and check any leakage. But these tests only perform between the combustion chamber and boiler shell. Because inside the combustion chamber a burner will fit into the combustion chamber.
Next, some insulation material will be warp with the pressure vassal. This insulation material helps to retain heat. Then they warp the outer jacket around the shell and secure in place by some sheet metal screws. After that, a blower is installed with pressure vassal. This blower will supply the fresh air into the combustion chamber. The next worker attached a water column with the outer shell of the boiler. This water column provides some safety inspection like water level during operation. It also has some sensor that provides valuable data to the boiler operator.
Now come to the electrical control section. A worker installs an electrical control device that helps to operate this boiler automatically. Then they power up the boiler by firing the burner. After that, they open the steam outlet pipe and on a test line and check all control device is working or not. This test includes water level and blower testing. When the boiler generated the correct amount of heat and steam then it passes the test. Then manufacturer labeling with each unit of the boiler before it comes to you.
Ask Question & Get Answer Which is Related to Boiler & Pressure Vessel.
1 post • Page 1 of 1